Restart Program Header

Up

Back

 

Report Header

 
 
 

Site Map

 

helmel.com

Introduction

Restart Program Header

At the end of an inspection run, the Restart Options dialog will appear. There are 5 options available after the inspection run.

<Restart>

Restarts the current inspection starting from step 1.

<Run Steps>

This command works with both manual and DCC systems. When you select this function, the Feature Selection tool will display the features in the inspection report. Choose the feature that Rerun will continue from. Geomet will then remove all steps from the last feature, up to and including the feature you have selected.

On a DCC system, a Target Tool will appear to guide you safely to the starting point. When you have placed the CMM at this starting point, press <Continue> and the inspection will continue under DCC control from that location.

<New>

Starts a new inspection prompting you to save your current inspection file.

<Print Report>

Performs an On Demand printout of the complete inspection report in standard format.

<Concise Report>

Performs an On Demand printout of the complete inspection report in Concise format.