Command Activation
| q |
System→Results→Results Only
System→Results→Both |
|
| Keyboard |
Main Menu |
Toolbar |
Introduction
 |
| figure
1, Select Display Layout |
The Geomet display is organized into Results and
Graphics regions. These are not overlapping Windows, but they do share a
common border. The two regions are interconnected through functionality. For
example, highlight a feature in the report region and the corresponding
graphic feature also highlights.
To control the regions, there are three available
options:
Shared Space
The results and graphic regions equally share the
display area.
Results Only
No graphic region is shown. This allows viewing of all
columns in the report area.
NOTE: Shared Space and Results Only are controlled by
the keystroke <q> which acts as a toggle between the two modes. The
pull-down menus are available as shown in figure 1.
Quick Zoom
This mode toggles the display between standard layout
where results and graphics share equally the display. However, when you
position the mouse in the graphics area, the display changes giving the
graphics area 90% of the available width. Move the mouse off the graphics
area, and the layout returns to equally shared regions.
To activate Quick Zoom mode, go to
System Options. Place a check
next to Activate Quick Zooms to enable the mode.
Related Procedures:
System Options
|
