Default File Locations

Up

Back
 
Support Tools;

Export Key
 
 
 

Site Map

 
helmel.com

Introduction

When the Geomet installer is ran, it places the required files into specified locations on your hard drive. The file type and default locations are listed below for reference.

Please note that these are the default locations. During the installation you may have elected to override the default locations.

Geomet Program

The Geomet Program consists of files that have the type:

Geomet Program and Support Files
File Extension Description / Location
.exe Geomet Programs
C:\Program Files\Helmel Engineering\Geomet 101
.dll Geomet Support Software Libraries
C:\Program Files\Helmel Engineering\Geomet 101
.ocx Geomet Active X Controls and Interfaces
C:\Program Files\Helmel Engineering\Geomet 101
.wav Geomet Sound Files
C:\Program Files\Helmel Engineering\Geomet 101
.rtf Geomet Message Files
C:\Program Files\Helmel Engineering\Geomet 101
.HST Geomet Advance Undo History Files
C:\Program Files\Helmel Engineering\Geomet 101
.GCF Geomet Control File Database Files
C:\Program Files\Helmel Engineering\Geomet 101
.gcs Geomet Fixture Coordinate System Database
C:\Program Files\Helmel Engineering\Geomet 101
.cvs Geomet Web Help Index File
C:\Program Files\Helmel Engineering\Geomet 101
.log Geomet CMM Interface Log Files
C:\Program Files\Helmel Engineering\Geomet 101
.txt Geomet Operations Log Files
C:\Program Files\Helmel Engineering\Geomet 101

 

CMM Interface Archives
File Extension Description / Location
.ocx Geomet CMM Interface Modules
C:\Program Files\Helmel Engineering\Geomet 101\Interfaces

 

Geomet Stylus Database Files
File Extension Description / Location
.db Geomet Stylus Database. Supports versions 6.65 and earlier.
C:\Program Files\Helmel Engineering\Geomet 101
.db1 Geomet Stylus Database. Supports versions 6.66 and newer.
C:\Program Files\Helmel Engineering\Geomet 101
.gdb Geomet Probe Definition Database
C:\Program Files\Helmel Engineering\Geomet 101

 

Geomet Inspection Files and Support Files
File Extension Description / Location
.GMT Geomet Inspection Files.
C:\My Documents\Geomet 101\Part Inspections
.SPC
.TXT		 Geomet SPC ASCII Export Files.
C:\My Documents\Geomet 101\SPC Data
NOTE: This extension can vary based on user selection.
.gst GeoStat Realtime SPC Data Files
C:\My Documents\Geomet 101\GeoStat Data
.GTR GeoTracker Management Tools
C:\My Documents\Geomet 101\GeoTracker

return to System Options